In this blog I will discuss tips on how to fix computers. Maybe there are preparations that need to be prepared. For hardware that needs to be provided such as screwdrivers (plus and min), avo meter and pliers. All three of these tools is a very basic requirement if the third tool like a screwdriver, and pliers avo meter does not exist should not try to repair the computer because it is definitely going to have obstacles.
As for software, which must be provided by the operating system, standard applications like Microsoft Office and anti virus. In addition, drivers are required for the computer hardware.
Once the equipment is already available then begin to check the computer that is damaged.
Before taking action on the broken computer noticed electrical power cable that is connected between the central processing unit (cpu) with socket. Disconnect the electrical connection between the cpu to the socket first.
Power supply
Once the power lines cut off then started opening the CPU (casing), then release all the cables are attached between the mainboard components such as data cables between the hard disk, cd-rom, power supply.
Make a check on the stresses that come out of the power supply is still in accordance with the information listed in case the power supply or not. If it does not fit then do the repair on the power supply or replace with a new power supply. Problem repair or replace the power supply depends on the heavy or light damage to the power supply. If the damage is severe (occurring short circuit and catch fire) would be better replaced with new ones.
Memory
If on initial examination on the power supply voltage and it turns all sizes are still in good condition then the next check the cleanliness of the memory chips in particular on the yellow gold embedded into the motherboard. Perform cleaning on the yellow gold using a rubber eraser.
Card-Card
Apart from memory, which must be done is cleaning cards (cards) like vga cards, sound cards, modems, lan cards, TV-Tunner card (internal tv Tunner).
Processor
Processor is very important in the computer system because it is a data processing center. Processor temperature must be maintained during data processing, therefore ordinary processor equipped with a refrigerator and an electric fan (fan) little time to set the temperature on the processor does not exceed the maximum limit prescribed. If the hot temperatures found in the checking processor exceeds the maximum limit should do the cleaning on the heatsink and fan. This is done if the function is still normal fan (can spin very well). If the fan is not functioning properly you should do the replacement with a new fan. Physical damage rarely occurs on the processor but do not close the possibility of damage to the processor. To prove it, try using the processor on the motherboard are different.
Mainboard / motherboard
The motherboard is not as important as the processor. Motherboard more often damaged due to the less stable flow of electricity, turn off the computer without proper shutdown process (directly off the flow of electricity), the occurrence of short circuit (electrical short circuit) due to dust.
Look at the legs of the embedded components, whether there is a burning or not if there is a burning, then it is likely the motherboard is damaged. If the motherboard is damaged then the solution must perform a new motherboard replacement, due to replace these components will have difficulty because of its size is very small.
The above is my computer repair tips, hopefully useful for you all:)
As for software, which must be provided by the operating system, standard applications like Microsoft Office and anti virus. In addition, drivers are required for the computer hardware.
Once the equipment is already available then begin to check the computer that is damaged.
Before taking action on the broken computer noticed electrical power cable that is connected between the central processing unit (cpu) with socket. Disconnect the electrical connection between the cpu to the socket first.
Power supply
Once the power lines cut off then started opening the CPU (casing), then release all the cables are attached between the mainboard components such as data cables between the hard disk, cd-rom, power supply.
Make a check on the stresses that come out of the power supply is still in accordance with the information listed in case the power supply or not. If it does not fit then do the repair on the power supply or replace with a new power supply. Problem repair or replace the power supply depends on the heavy or light damage to the power supply. If the damage is severe (occurring short circuit and catch fire) would be better replaced with new ones.
Memory
If on initial examination on the power supply voltage and it turns all sizes are still in good condition then the next check the cleanliness of the memory chips in particular on the yellow gold embedded into the motherboard. Perform cleaning on the yellow gold using a rubber eraser.
Card-Card
Apart from memory, which must be done is cleaning cards (cards) like vga cards, sound cards, modems, lan cards, TV-Tunner card (internal tv Tunner).
Processor
Processor is very important in the computer system because it is a data processing center. Processor temperature must be maintained during data processing, therefore ordinary processor equipped with a refrigerator and an electric fan (fan) little time to set the temperature on the processor does not exceed the maximum limit prescribed. If the hot temperatures found in the checking processor exceeds the maximum limit should do the cleaning on the heatsink and fan. This is done if the function is still normal fan (can spin very well). If the fan is not functioning properly you should do the replacement with a new fan. Physical damage rarely occurs on the processor but do not close the possibility of damage to the processor. To prove it, try using the processor on the motherboard are different.
Mainboard / motherboard
The motherboard is not as important as the processor. Motherboard more often damaged due to the less stable flow of electricity, turn off the computer without proper shutdown process (directly off the flow of electricity), the occurrence of short circuit (electrical short circuit) due to dust.
Look at the legs of the embedded components, whether there is a burning or not if there is a burning, then it is likely the motherboard is damaged. If the motherboard is damaged then the solution must perform a new motherboard replacement, due to replace these components will have difficulty because of its size is very small.
The above is my computer repair tips, hopefully useful for you all:)
Comments
Post a Comment